#Dsc alarm panel mute alert beeping how to

You can use the following tables to determine the status of the PCM. The remaining two LEDs indicate the status of the backup battery module in the PCM. Four of these LEDs display the status of the power supply and the fan. The status of the PCM is indicated on the LED panel. The following illustration shows the LED panel for the device. The StorSimple device has a 764W PCM module with an additional battery.

#Dsc alarm panel mute alert beeping how to

This topic discusses how to use the following LEDs to monitor the status of your StorSimple device. Power cooling module (PCM) indicator LEDs can be found on the back of the primary enclosure or EBOD enclosure on each PCM module. Power cooling module (PCM) indicator LEDs Unknown controller module type installed, I2C bus failure, controller module vital product data (VPD) configuration error System powerР”Р„C power lost, operating on backup power, or AC power ON and the controller modules were removed.Р”Р„ny PCM fault, fan fault, over or under temperature Use the following table to identify the status indicated by the LEDs on the front panel for the device or the EBOD enclosure. If your device is turned off, use the information provided in Turn on a new device to differentiate the device from the EBOD enclosure. This allows you to quickly differentiate between the device and the EBOD enclosure when the device is turned on. The default unit ID displayed on the device is 00, whereas the default unit ID displayed on the EBOD enclosure is 01. The major difference between the front panel LEDs for the device and those for the EBOD enclosure is the System Unit Identification Number shown on the LED display. Logical fault indicator LED (ON red-amber/OFF.Module fault indicator LED (ON red-amber/OFF).The front panel contains the following indicators: The front panel is identical on the StorSimple primary and the EBOD enclosure, and is illustrated below. The front panel, also known as the operations panel or ops panel, displays the aggregate status of all the modules in the system. The remainder of this article describes the various monitoring indicator LEDs, their locations on the StorSimple device, the device status based on the LED states, and any associated audible alarms. Red-amber LEDs indicate that there is a critical fault present within the module.Flashing green to red-amber LEDs represent the presence of non-critical conditions that might require user intervention.Green LEDs represent a healthy operating status.

There are three LED states used to indicate the status of a module: green, flashing green to red-amber, or red-amber. The monitoring indicators can be either LEDs or audible alarms. The monitoring indicators can be found on the hardware components of the device's primary enclosure and the EBOD enclosure. Your StorSimple device includes light-emitting diodes (LEDs) and alarms that you can use to monitor the modules and overall status of the StorSimple device.